C&H Technologies, Inc.
•
445 Round Rock West Drive • Round Rock, TX 78681-5012
M206
Pulse Amplifier
The M206 is a programmable pulse
amplifier that accepts a fixed level
input pulse and provides dual
complementary switched outputs.
The module produces a total of four
outputs.
same active-level as the input pulse
and two outputs have the
Two outputs have the
complement level of the input pulse.
The output level is programmable
up to 30V into no load (up to 15V
into a 50Ω load). An external +36V
supply is required. An external
power interlock and a pulse interlock
are provided.
M Module Compliance
Specifications:
Inputs/Outputs:
Complies with ANSI/VITA Std. 12-
1996 for triple-wide MA Modules
Outputs:
• Pulse Input
Two true (A & B) and two
complement (A & B) outputs
• True Output A
Data Transfers:
Interrupts:
16 bit
not supported
not supported
• True Output B
Frequency:
Input:
20MHz max.
• Complement Output A
• Complement Output B
• External Power (+36V)
• External Power Interlock
• Pulse Interlock
Triggers:
TTL
Compatible with VXI, VME, PCI,
cPCI and other M Module carriers.
Output Amplitude:
RLOAD = 50Ω
+0.21V to +15V
+0.42V to +30V
Applications
RLOAD = ∞
External Power:
36V 2A supply required
• Pulse amplification
• Pulse level shifting
Output Current:
Source
300mA
100mA
Front Panel Connectors:
Pulse Input/Outputs
Sink
SMA
Ext. Pwr. & Interlocks 9-pin DSUB
Ordering Information
Output Impedance:
50Ω
Temperature:
Operating:
Storage:
Part Number
11028470-0001
Programming Resolution:
10V range
0°C to 50°C
-40°C to 70°C
2.50mV
7.50mV
Additional Information
30V range
Power (typical):
+5V
+12V
-12V
Ext. +36V
User Manuals for C&H carriers and
this module can be found on our
Accuracy:
±0.75% ±75mV
150 mA
300 mA
100 mA
1.0 A
Rise/Fall Time:
30V, RLOAD = ∞
30ns
|